On April 21, 1954, the Hedong Hui Autonomous Region of Ningxia was formally established, with Wuzhong City, Jinji County, Lingwu County and Tongxin County under its jurisdiction. On July 14, approved by the Ministry of Internal Affairs, Yinchuan City was merged from six districts into four districts. In September, Ningxia Province was abolished and merged into Gansu Province. On Nov 3, after Ningxia was merged into Gansu Province, the administrative divisions of Hedong Hui Autonomous Region and Inner Mongolia Autonomous Region remained unchanged, and the new Yinchuan Autonomous Region was created.
On April 28, 1955, Hedong Hui Autonomous Region of Gansu Province was renamed Wuzhong Hui Autonomous Prefecture of Gansu Province, with Jinji, Lingwu and Tongxin counties under its leadership and Yanchi County under its administrative authority. On December 1, The State Council approved Yanchi County to be formally placed under the jurisdiction of Wuzhong Hui Autonomous Prefecture.
On November 15, 1955, with the approval of The State Council, Xihaigu Hui Autonomous Region was renamed Guyuan Hui Autonomous Prefecture.
In January 1950, Wuzhong City was established. In May, it was changed to Wuzhong Town. In October, it was restored to Wuzhong City.
On May 25, 1950, the People's Government of Gansu Province decided that Xiji County and Haiyuan County, which were formerly in the Dingxi Special Area, were assigned to Pingliang Special Area.
In May 1952, the fourth and sixth districts of Yongning County and the fourth District of Helan County were divided into Yinchuan City. On August 15, in order to promote ethnic unity, Dingyuanying, the capital of Alxa Banner, was renamed "Bayinhot", which was approved by the central government on October 16.
On November 27, 1953, the People's Government of Gansu Province announced that Xihaigu Hui Autonomous Region was formally established on October 29, and on April 1, the preparatory Committee of Ningxia "Jin, Ling, Wu and Tong" Hui Autonomous Region was established in Wuzhong City, working with the People's Government Office of Wuzhong City. On April 4, the Ningxia provincial government approved the establishment of two Hui autonomous regions in Huinong County, namely Baofeng Hui Autonomous Region and Lingsha Hui Autonomous Region. In May, Zhongning County play Yi mountain township (the original four areas six township) under the jurisdiction of Tongxin County. In July, Ningxia "Jin, Ling, Wu and Tong" Hui Autonomous Region Preparatory Committee was renamed Ningxia Hedong Hui Autonomous Region Preparatory Committee.
On April 21, 1954, the Hedong Hui Autonomous Region of Ningxia was formally established, with Wuzhong City, Jinji County, Lingwu County and Tongxin County under its jurisdiction. On July 14, approved by the Ministry of Internal Affairs, Yinchuan City was merged from six districts into four districts. In September, Ningxia Province was abolished and merged into Gansu Province. On Nov 3, after Ningxia was merged into Gansu Province, the administrative divisions of Hedong Hui Autonomous Region and Inner Mongolia Autonomous Region remained unchanged, and the new Yinchuan Autonomous Region was created.
On April 28, 1955, Hedong Hui Autonomous Region of Gansu Province was renamed Wuzhong Hui Autonomous Prefecture of Gansu Province, with Jinji, Lingwu and Tongxin counties under its leadership and Yanchi County under its administrative authority. On December 1, The State Council approved Yanchi County to be formally placed under the jurisdiction of Wuzhong Hui Autonomous Prefecture.
On November 15, 1955, with the approval of The State Council, Xihaigu Hui Autonomous Region was renamed Guyuan Hui Autonomous Prefecture.
Republic of China, the Republic of China year (1912) in January, changed the government to Tao. Since the right side is Shuo Fang, it is changed to Shuo Fang road. Two years of the Republic of China (1913), and changed back to Ningxia Road. Seventeen years (1928) of the republic of China on October 17, the central government of the republic of China for the 159th time meeting resolution will ningxia road (that is, the north road) old eight counties (county, NingShuo county, ningxia pingluo county, ZhongWei County, LingWu County, jin county, the existing peace far) deposition and ningxia army make their (i.e., a la shan flags, mesozoic-cenozoic merger in ningxia province. In January, the 18th year of the Republic of China (1929), the government of Ningxia Province was established. Today's Yinchuan City of Ningxia was the capital of Ningxia and called "Ningxia Provincial City". He also assigned Dengkou County to Dengkou County in Baag of Alxa. In January OF REPUBLIC 22 (1933), Chiang Kai-SHEK APPOINTED MA Hung-KUI AS the CHAIRMAN OF Ningxia Province, AND MA HUNg-KUI assumed the presidency OF Ningxia. In September of the 22nd year of the Republic of China (1933), the eastern part of Zhongwei County was designated as Zhongning County. On April 1, the 30th year of the Republic of China (1941), the two counties of Ningxia and Ningshuo were designated as Yongning County, and the northern part of Pingluo County was added to Huinong County and Taole County, and Ningxia County was renamed Helan County. In April, 1933 (1944), Yinchuan City was added. Thirty-four years of the Republic of China (1945), the Lingwu County under the Wuzhong town changed to Wuzhong City. New Ningxia Lingerqi nine counties: Alxa banner, Azina banner; Ningxia County, Ningshuo County, Pingluo County, Zhongwei County, Lingwu County, Jinji County, Yanchi County, Zhenrong County (later changed to Yiwang County, then changed to Tongxin County), Dengkou County. The Xiangshan, Juyan and Purple Lake were added. Thirty-six years (1947), the local government of Ningxia established Yinchuan City. Since then, until the eve of liberation, the whole area has added up to 13 counties, 1 city, 3 administrative bureaus.
Ming Dynasty, at the beginning of the government in Ningxia, after the change of Wei. Once added Ningxia Zuo Tun Wei, Tun Wei and the avant-garde, central defenders, defenders. After that, Ningxia Town and Guyuan Town were set up, and nine defense areas were set up along the Great Wall, called nine towns, which were two of the key towns along the Ming Dynasty.
Qing Dynasty, Shunzhi five years (1648), the Qing Dynasty in Ningxia governor, a Shaanxi secretary, under the system, Ningxia quasi provincial. After the retreat, it was changed to Ningxia Prefecture, under the state county, belonging to Gansu, but the general of Ningxia was promoted to the governor, and the general of Manying was added to Ningxia, still without losing the provincial pattern.
In the Tang Dynasty, the entire region of Ningxia was Guannei Dao, with six prefectural states: Yuanzhou, Lingzhou, Xihui Zhou, Anle Zhou, Xiongzhou and Jingzhou. In the 14th year of Tianbao (755), the "Anshi Rebellion" broke out in the Tang Dynasty. The crown prince Li Heng ascended the throne in Lingwu, Ningxia and became Emperor Suzong of Tang.
In the Northern Song Dynasty, Ningxia belonged to Qinfenglu. Later, the northern part of Ningxia was occupied by Li Jiqian of Dangxiang nationality. The Northern Song controlled only the southern part of Ningxia, and the southern part of Ningxia belonged to Jingyuan Road.
In the Yuan Dynasty, the former land of the Western Xia State was set up in the Western Xia Zhongxing road and other provinces. In the 24th year of Yuan Dynasty (1287), Ningxia Fu Road was set up, from which Ningxia got its name.
In the Tang Dynasty, the entire region of Ningxia was Guannei Dao, with six prefectural states: Yuanzhou, Lingzhou, Xihui Zhou, Anle Zhou, Xiongzhou and Jingzhou. In the 14th year of Tianbao (755), the "Anshi Rebellion" broke out in the Tang Dynasty. The crown prince Li Heng ascended the throne in Lingwu, Ningxia and became Emperor Suzong of Tang.
In the Northern Song Dynasty, Ningxia belonged to Qinfenglu. Later, the northern part of Ningxia was occupied by Li Jiqian of Dangxiang nationality. The Northern Song controlled only the southern part of Ningxia, and the southern part of Ningxia belonged to Jingyuan Road.
In the Yuan Dynasty, the former land of the Western Xia State was set up in the Western Xia Zhongxing road and other provinces. In the 24th year of Yuan Dynasty (1287), Ningxia Fu Road was set up, from which Ningxia got its name.
In the Han Dynasty, it belonged to the Department of Xuanfang. In the Western Han Dynasty, the county of Beidi was transferred to Huan County, Gansu Province. Guyuan established Anding county; Ningxia is divided into Beidi county and Anding county. In the Eastern Han Dynasty, the county administration of Anding was moved to Zhenyuan County, Gansu Province, and the county administration of the northern region was moved to the southwest of Litong District, Wuzhong City.
The Sixteen States was the territory of the Great Xia State founded by Helienbo, the chief of the Iron Buddha Department of Xiongnu.
The Northern Wei Dynasty and the Northern Zhou Dynasty continued to promote the migration of villages, which was again effectively developed, and Ningxia began to be called "North and South of the border".
Western Zhou Dynasty, the territory north of the Zhou Dynasty, including Hetao in Inner Mongolia, the whole of Ningxia and Shaanxi, northern Shanxi called Shuofang.
In the Spring and autumn, QU YANrong is QU Yanrong's sphere of influence in the present Guyuan area, with Yanchi as the center. During the Warring States Period, King Huiwen of Qin captured Wurong Land and placed Wushi County (north bank of Jingshui in the south of today's Guyuan County) under the jurisdiction of today's Guyuan area. After QU Yan COUNTY was set UP in YanCHI COUNTY, jurisdiction over the Yinnan area today.
In the Qin Dynasty, after the 35th year of King Zhaoxiang (272 BC), the two counties were placed under the jurisdiction of Beijun, which was the beginning of the administrative establishment in Ningxia region. In the Qin Dynasty, Ningxia was the north county, which was governed in Ningxian County, Gansu Province. The Qin Great Wall and Qinqu were built here to divert water from the Yellow River to irrigate farmland.
As we mentioned in article The Surprising Secret to Designing Combination Method of PCB Panels, panelization is a must-have with the consideration of PCB fabrication efficiency, reducing PCB assembly labor cost and quality control.
Panel Requirements for PCB Assembly
PCBCart does PCB Assembly panel production with min size 50*50mm, max size 310*410mm. We can manufacture circuit boards based on your panelized PCB file. If you only have single PCB file, we can help panelize design according to your specific demands, then manfuacture the boards. Feel free to send us a message if you need assistance in PCB Assembly panel, we'll react accordingly.
1. Panel with V-CUT/V-GROOVE
We require 0.0mm spacing between each unit for panel with V-cut, following image for your reference.
As we mentioned in article The Surprising Secret to Designing Combination Method of PCB Panels, panelization is a must-have with the consideration of PCB fabrication efficiency, reducing PCB assembly labor cost and quality control.
Panel Requirements for PCB Assembly
PCBCart does PCB Assembly panel production with min size 50*50mm, max size 310*410mm. We can manufacture circuit boards based on your panelized PCB file. If you only have single PCB file, we can help panelize design according to your specific demands, then manfuacture the boards. Feel free to send us a message if you need assistance in PCB Assembly panel, we'll react accordingly.
1. Panel with V-CUT/V-GROOVE
We require 0.0mm spacing between each unit for panel with V-cut, following image for your reference.
As we mentioned in article The Surprising Secret to Designing Combination Method of PCB Panels, panelization is a must-have with the consideration of PCB fabrication efficiency, reducing PCB assembly labor cost and quality control.
Panel Requirements for PCB Assembly
PCBCart does PCB Assembly panel production with min size 50*50mm, max size 310*410mm. We can manufacture circuit boards based on your panelized PCB file. If you only have single PCB file, we can help panelize design according to your specific demands, then manfuacture the boards. Feel free to send us a message if you need assistance in PCB Assembly panel, we'll react accordingly.
1. Panel with V-CUT/V-GROOVE
We require 0.0mm spacing between each unit for panel with V-cut, following image for your reference.