|
Product Details:
|
| Application: | Other | Alloy Or Not: | Non-Alloy |
|---|---|---|---|
| Section Shape: | Round | Special Pipe: | Other |
| Outer Diameter: | 5 - 10 Mm | Thickness: | 5.5 |
| Standard: | JIS | Length: | 6m |
| Certificate: | GS | Grade: | Q345 |
| Surface Treatment: | Hot Rolled | Tolerance: | ±1% |
| Processing Service: | Cutting | Oiled Or Non-oiled: | Non-oiled |
| Invoicing: | By Actual Weight | Delivery Time: | 8-14 Days |
| Production Process: | Seamless Steel Tube | Classification: | Circular/ Irregular Shapes |
| Function: | Conveying Fluid | Characteristics: | No Seams On The Surface |
| Alternative Name: | Thick Wall Steel Pipe | Production Method: | Hot Rolled / Cold Rolled Pipes |
| General Purpose: | Water/gas Pipelines/structural Components/mechanical Parts | Special: | Boiler/geological Exploration/bearings/acid Resistance, Etc |
| Chemical Composition: | Infrared C-S Instrument | Nondestructive Inspection: | Ultrasonic Testing UT |
| Port: | Tianjin/Qingdao/Guangzhou/Other China |
Mechanical performance indicators | ||||||
Tensile strength（ σ B) | The maximum force (Fb) that the specimen bears during the tensile process at break, divided by the stress obtained by dividing the original cross-sectional area (So) of the specimen（ σ）， Called tensile strength（ σ b) , in N/mm2 (MPa). It represents the maximum resistance of metal materials to failure under tensile force. | 180 | ASTM D 1709 | |||
Yield point | The stress at which a metal material with yield phenomenon can continue to elongate without increasing (maintaining a constant) force during the tensile process is called the yield point. If the force decreases, the upper and lower yield points should be distinguished. The unit of yield point is N/mm2 (MPa). Upper yield point（ σ Su): The maximum stress of the sample before yielding and the first decrease in force; Lower yield point（ σ SL): The minimum stress in the yield stage when the initial instantaneous effect is not considered. | 60 | ASTM D 1922 | |||
Tear strength TD Elmendorf | g | 12 | ASTM D 1922 | |||
Contact Person: henny
Tel: 17720203333
Fax: 86-123-123-123123
